Courses:

Introductory Analog Electronics Laboratory >> Content Detail



Projects



Projects

Special software is required to use some of the files in this section: .avi.



Design Project


During the last half of the semester, you will be working on a design project. The class will be broken into teams of 3 persons, and each team will decide on a project. This project must be conceived in terms of a "product'' that your team will design, with a set of overall objectives and especially with a set of minimum specifications which it must meet. Each team will then compete to design the best product (most elegant design, best performance, most closely meets specifications, most intuitively operated, lowest parts count and parts cost, etc.).



Important Note


Many of the ideas that will intrigue you can also be implemented using "digital" techniques; however, this is an analog course; use of digital circuitry in your final project design will result in points being deducted from your project grade, unless you get permission in advance from the design staff, which means there has to be NO other way to achieve a certain function without the digital circuitry. If the main function of your project uses digital techniques, forget it!! Also forbidden are dedicated "chips" such as National's "AM-radio-on-a-chip" that require little understanding of the circuit operation to use. We want to teach you to learn to design things using the basic building blocks: op-amps, FET switches, current mirrors, discretes, etc. We want to train you so you can go to work for Linear Technology or Analog Devices or Silicon Labs and design sophisticated chips!



Objective


The objective of the design project is to simulate the process of system design as it might occur in a "real-world'' manufacturing environment. You can think of your team as working for a company who has identified a product in which consumers are interested. Your team will have to develop an implementation strategy, design the required circuitry, debug it and achieve a final implementation, complete with documentation. This will give you a chance to deal with real-world design issues: what are the trade-offs involved in choosing a design, how does one select specific parts, how much power will the circuit draw and how do you design a suitable power supply, how should the circuit be laid out, packaged, etc.? Your final report will consist not only of a description of your circuit and how it operates but also a detailed description of the design process you followed.

The department provides a limited budget [roughly $100 per project] to fund your project. In addition to using parts from your lab kits and the stockroom, you will be able to purchase additional components as needed to complete your design. The details of how much each team will have to spend and the process for purchasing parts will be announced later in the semester.



Documentation


For your design project you will be expected to keep a complete record of your work (circuit ideas, calculations, results of your measurements and experiments, etc.) in your laboratory notebook. In addition to being good practice, your notebook will provide an accurate record of the various stages of your project to which you and your teammates will need to refer as you write the final report describing your project. At the end of the semester, we will collect your laboratory notebooks along with your design project reports. We will review your notebook as a record of your work in 6.101 and will consider it when evaluating your performance in the course.

During the second half of the term, your lab time will be devoted to your design project. You will make an initial team oral presentation at the beginning of the project period, to the teaching and the writing office staff, and a final oral presentation/demonstration at the end of the term to the teaching staff, and you will also turn in a written report at that time. The individuals who make the most outstanding contribution to their team's projects, based on electrical performance, project report, and staff evaluation, will win an auto-ranging DMM that also measures capacitance and temperature, or an M-cubed semiconductor analyzer kit as provided for your use in lab through a generous donation from Linear Technology Inc.



Final Presentation and Written Report


The initial and final oral presentations, and the written report for the design project will be a team effort. These are also part of the requirement for the CI-M writing credit.

Your group will also meet with the instructing staff on approximately a bi-weekly basis to discuss your block diagrams, circuit schematics, etc. so that we may monitor your progress, much as engineering design reviews in industry are conducted. Part of this monitoring procedure includes a checkoff of the operation of your basic circuitry.



Using your Project and Paper to Satisfy the CI-M Requirement


6.101 is a Communication Intensive-Major (CI-M) class. Your paper must satisfy the CI-M requirements, you must clearly identify your contribution to the group paper, and you must turn your draft paper in a few days before your project is due so that the writing office staff will have time to make corrections to the paper so that you will have time to revise it before the last day of classes.

In addition, students will be required to make an oral presentation to the class at the start of the project period, and their final oral project presentations are also part of the CI-M requirement.

Someone from the writing program will address the class on how to write your paper, and the 6.101 staff will also give you information later in the term on what we require of your paper.

Project Miscellanea (PDF)



Student Project Video


One student group designed an inductor heating element, here shown making scrambled eggs. (AVI - 6.8MB)


 








© 2017 Coursepedia.com, by Higher Ed Media LLC. All Rights Reserved.